精品国产_亚洲人成在线高清,国产精品成人久久久久,国语自产偷拍精品视频偷拍

立即打開
內燃機照常轟鳴

內燃機照常轟鳴

Anne VanderMey 2012-10-25
汽車業內一度有觀點認為,傳統的內燃機不久就會退出歷史舞臺。然而,實際情況是,短期內都不太可能出現顛覆性的技術,徹底取代內燃機。但是,從大眾到寶馬,全球各大汽車制造商正在把大量的改良性技術成果整合到傳統的內燃機中,提高發動機性能,滿足監管部門越來越嚴格的燃油經濟性標準。

????另一個方法是渦輪增壓。根據霍尼韋爾交通系統部門(Honeywell Transportation Systems)的調查顯示,全球銷售的新車中有約25%配有渦輪增壓,而且到2017年這個比例最終可能會達到40%。這種技術本身已有近100年的歷史了,但汽車制造商正越來越多地采用這項技術。目前市場上有幾款渦輪增壓發動機就包括:福特的EcoBoost、馬自達的Skyactiv、寶馬的EfficientDynamics。渦輪增壓利用汽車自身產生的廢氣來驅動泵輪,迫使更多空氣進入氣缸。壓縮后的空氣可以和更多壓縮后的燃油(這里可以采用直噴技術)相混合,從而加大發動機的輸出動力。

????機械增壓是一個成本更加昂貴、但與渦輪增壓相類似的技術選擇。機械增壓器的作用基本上與渦輪增壓器相同,但它不是借助汽車廢氣來驅動泵輪,而通常是由發動機的風扇皮帶來帶動。機械增壓器的優勢是,不必等待汽車排出廢氣來開始增壓。機械增壓更常用于提高汽車性能,而不是提高燃油經濟性。

????很大程度上,包括福特(除了一款高性能的野馬汽車)在內的美國汽車制造商認為,機械增壓技術過于昂貴,相對于在發動機輸出功率方面實現的提高而言并不合算。這些公司大多轉而選擇渦輪增壓技術。然而,一些汽車——比如大眾1.4升TSI Twincharger 四缸發動機既有機械增壓器,也有渦輪增壓器。大眾及其海外合資企業是在發動機里結合包括柴油動力在內的諸多節能技術的早期倡導者,以此來節能意識格外強烈的歐洲客戶的需求。

????其他越來越常見的做法包括(但不限于):在有任何移動部件的地方減少摩擦。十年前還非常罕見的可變氣門正時技術現在幾乎是普遍存在。本田(Honda)在推出VTEC系統時首創了這項技術,VTEC系統甚至形成了自己的技術基因。而寶馬在這方面也取得了很大的進展,推出了Valvetronic系統。在配有Valvetronic系統的汽車里,一臺電腦智能地精確校準進氣孔與排氣閥的開關時間,以此與車輛的速度和負載相匹配。

????思邁汽車咨詢公司(IHS Automotive)全球汽車動力總成系統與部件預測部門負責人埃里克?費德瓦表示,預計未來可變氣門正時系統所帶來的巨大收益會變得越來越精確。而且,預計還將會出現更多的混合動力電動發動機,支持傳統內燃機。同時,汽車變速器將獲得更多速度設置,以便發動機在最高效的情況下運作。費德瓦說,10年后:“發動機尺寸必須會大幅縮小,而同時輸出功率很可能與目前相同、甚至更大。”過去,發動機技術改進的收益一直集中在輸出功率方面。費德瓦在提到如今的汽車時說:“基本上等于是讓消費者駕駛賽車發動機。”未來,發動機技術改進的重點將集中在提高燃油經濟性方面。

????所有這些創新所造成的影響是巨大的。根據密歇根大學交通研究所(the University of Michigan Transportation Research Institute)進行的分析顯示,自2007年以來,輕型車輛的燃油經濟性已提高了18%,達到23.8英里/加侖。燃油經濟性的改善部分歸功于發動機更加智能化,以及在汽車節能方面的一系列其他增量型改善。這個增長的實質幅度并不巨大,但與1923年至2007年期間所有汽車的燃油經濟性僅提高區區23%相比,這可謂是一個巨大的飛躍。

????當然,世界各國在打破依賴汽油的習慣方面還有很長的一段路要走,而內燃機并不會改變這一點。《國際汽車工程》雜志(Automotive Engineering International)高級編輯林賽?布魯克稱,汽車制造商在研制仍能給汽車提供強大動力的小型發動機方面面臨一個物理極限,而我們在大中型汽車方面已經達到這種極限,在其他類型汽車方面也非常接近這個極限了。在此之后,要想減少燃料消耗,美國將需要建造更多面向電動汽車的公共充電站,開發性能更加優良的電池,甚至或許要對內燃機產生一個新的看法(幾家初創公司目前正在這方面努力。)但現在,似乎老式的內燃發動機還將會伴隨我們很長一段時間——而這件事也許并不是那么糟糕。

????譯者:iDo98

????Another method is turbocharging. According to Honeywell Transportation Systems, turbochargers were in about 25% of new cars sold globally, and could end up in 40% of cars as soon as 2017. The technology itself is nearly a century old, but automakers are increasingly embracing it. A few turbocharged engines: Ford's EcoBoost, Mazda's Skyactiv, BMW's EfficientDynamics. Turbocharging uses a car's own exhaust to power a pump that forces more air into the cylinders. That compressed air can mix with more compressed fuel (hello, direct injection), resulting in more power.

????Supercharging is a more expensive, but similar option. Superchargers do essentially the same thing as turbochargers, but instead of being powered by a vehicle's exhaust, they're mechanically driven, usually by the engine's fan belt. The supercharger's advantage is that there's no need to wait for exhaust to come out for the boost to kick in. The supercharger is more commonly used for performance rather than fuel economy.

????This has been largely deemed too pricey to justify the extra power by U.S. automakers, Ford included (except for one high-performance Mustang variant). These firms have largely opted for turbochargers instead. However, some vehicles -- like the Volkswagen 1.4-liter TSI Twincharger four-cylinder engine -- have both. Volkswagen and its overseas counterparts were early pioneers of combining efficiency technologies, including diesel power, in engines for hyper-fuel conscious European customers.

????Other increasingly common tactics include, but aren't limited to, reducing friction wherever there are moving parts. And variable valve timing, which was rare a decade ago and is now almost ubiquitous. Honda (HMC) pioneered the technology, with its VTEC system, which even got its own meme. And BMW has also made strides with its Valvetronic system. In cars equipped with the system, a computer intelligently times the opening and closing of air intake and exhaust valves to match a vehicle's speed and load.

????In the future, expect big gains from variable valve timing systems becoming more precise, says Eric Fedewa, director of IHS Inc.'s global powertrain and component forecasting. Also expect more hybrid electric engines to work as a support to traditional engines. At the same time, transmissions will get more speeds, in an effort to make engines operate at their most efficient. In 10 years: "engines will necessarily be a lot smaller and probably as powerful or more powerful than they are now," Fedewa says. In the past, gains have focused on power. "You've essentially got consumers driving race car engines," Fedewa says of today's cars. In the future, gains will focus on efficiency.

????The impact of all these innovations is substantial. According to analysis by the University of Michigan Transportation Research Institute, fuel economy for light-duty vehicles has improved 18% since 2007, to 23.8 miles per gallon. Part of the credit for those gains goes to smarter engines, along with a host of other incremental improvements in vehicle efficiency. The increase isn't huge in real terms, but it's a giant leap compared with the scant 23% gain in the fuel economy of all vehicles between 1923 and 2007.

????Of course, the world is still a long way from breaking its gasoline habit, and internal combustion won't change that. There's a physical limit to how small an automaker can make an engine and have it still power a car, and we've already hit it in large and midrange vehicles, says Automotive Engineering International senior editor Lindsay Brooke, and we're close in other classes. After that, to reduce fuel consumption the country will need more public chargers for electric cars, better batteries, and maybe even a new take on internal combustion. (Several startups are working on it.) But for now, it looks like the old-fashioned engine will be with us for a long time still -- and that might not be so bad.

熱讀文章
熱門視頻
掃描二維碼下載財富APP

            主站蜘蛛池模板: 仁寿县| 分宜县| 石台县| 炎陵县| 襄汾县| 玉田县| 乌兰县| 百色市| 宁化县| 双鸭山市| 福建省| 普安县| 磐石市| 嵩明县| 巴林左旗| 广州市| 五峰| 包头市| 墨竹工卡县| 肃宁县| 三江| 辽阳县| 新竹县| 西乌| 水城县| 蒙自县| 阳朔县| 鄂托克前旗| 乳山市| 池州市| 平塘县| 岢岚县| 靖安县| 北碚区| 金堂县| 原平市| 阿拉善盟| 衡阳市| 枣阳市| 望城县| 漯河市|